Bostitch T50 Especificações descarregar pdf (Página 11)

DIRECTIONAL EXHAUST DEFLECTOR

Loosen screw as shown. Adjust to desired exhaust direction and tighten screw.

-11-

ACCESSORIES AVAILABLE

BC601 4 oz. Stanley-Bostitch Air -Tool Lubricant

BC602 1 pint Stanley-Bostitch Air -Tool Lubricant

BC603 1 pint Stanley-Bostitch “Winter-Formula” Air-Tool Lubricant

BC604 1 quart Stanley-Bostitch Air -Tool Lubricant

100679 O-Ring Lube (1lb. can)

851325 Locite Grade 271 (.02 oz.)

851385 Locite Grade 242 (.02 oz.)

N80K2 Remote Control Kit

ORK1 O-Ring Kit

BK6 Bumper Kit

107704 Foot, Contact Arm

Models T50S2, T50S4 and T50S5 contain a Quick Release Door feature. The door is designed to

“pop” open if a jam occurs providing easy access for removing a jammed fastener.

ALWAYS DISCONNECT AIR SUPPLY BEFORE CLEARING A JAMMED FASTENER.

If the door does not “pop” open when a jam occurs, it can easily be opened with a

screwdriver, as shown in illustration #1. Use a firm twist on the screwdriver to open the door,

see illustration #2.

The door will not open completely if the driver is still down. To open the door completely the driver

must be pushed back into the tool.

The “Quick Release Door” makes cleaning the nose and front portion of the magazine a rapid and

easy operation with a minimum of effort.

To close the door simply press the door firmly against the edge of the work table or suitable stationary

object until the two latch pins snap into a locked position.

CAUTION:

Do not use your hands to close the door as injury may occur if skin is pinched

between the door and nose when the latch pins engage.

QUICK RELEASE DOOR

FIG. 1

FIG. 2

1 2 ... 6 7 8 9 10 11

Sem comentários

Bostitch T50 Especificações Página 11